News from AKEMI^®

PRODUCTS

OUT NOW! MS 76 Rodding Bond

(213.93 kByte)

MS 76 Rodding Bond - in the cartridge - for groove reinforcement wih metal, glass fibre and carbon fibre

MS 76 Rodding Bond (System 10:1) is a simple, reliable and economic method of bonding reinforcements in kitchen worktops made of metal (such as iron, steel and aluminium) and a wide variety of plastics (such as glass fibre and carbon fibre plastics). MS 76 Rodding Bond is suitable for unloaded groove bonding up to a temperature of 100° C. The short hardening time
(20 – 40 minutes) enables fast further processing.

Advantages:

very good adhesion on metal, GRP, CRP
rapid hardening (work can continue after 20 - 40 minutes)
suitable for groove bonding indoors up to 100° C
simple dosing and mixing on account of the cartridge system and therefore reliable application
high cost effectiveness due to time-saving application and no waste of adhesive

Technical Instruction Sheet (45.17 kByte)

OUT NOW! Epoxy Remover

Epoxy Remover: "Free of acids - Lyes and CHC"

Removes residues of resins and adhesives from all natural stones,
ceramic tiles and other mineral surfaces.

Due to its very good dissolving and expansion properties Epoxy Remover removes:

Residues of epoxy resins
Residues of joint mortar based on epoxy resins
Sealings based on synthetic resins
Other resins and adhesive residues

The cleaner can be used on all contaminated surfaces made of natural and artificial stone like granite, gneiss, quartzite, limestone, concrete ashlar, clinker and ceramics.

Technical Instruction Sheet (32.34 kByte)

OUT NOW! Darkener Plus

(152.89 kByte)

Farbonvertiefer Plus: Ready-to-use special impregnation, which can be dyed using AKEMI Stone Ink. Darkens the colour and structure of fine ground and polished stones.

AKEMI Darkener Plus transports the AKEMI Stone Ink dye stuff into the stone's pore system and has a long-lasting effect. Suitable for all fine ground and polished, absorbent natural and artificial stones, such as marble, slate, Solnhofen slabs, sandstone, granite, gneiss and concrete blocks.

Properties:

lasting, darkening effect
intensifies and changes colour in combination with AKEMI Stone Ink
effective coulour stability

Technical Instruction Sheet (39.17 kByte)

OUT NOW! COLOUR BOND!

(419.62 kByte)

COLOUR BOND: pre-coloured two-component adhesive in 250 ml cartridges for the fast, simple and reliable attainment of invisible joints for Engineered Stone (such as Caesarstone, Silestone, Zodiaq) as well as natural stone.

Advantages:

ready-to-use cartridges with colour-matched adhesives
application reliability: exact dosage and mixing
economy: no preparation time (no manual dosage and mixing); fast application (direct into the joint); no excess adhesive during the work process; no time needed for cleaning afterwards
enables the attainment of extremely thin, seamless adhesive joints
adhesive on the basis of polyester resin, thus no pungent odours as with acrylic bonding systems
clear product range (reduction to the main colours for engineered stone and natural stone) saves retailers and users costs
high adhesive strength
despite extremely high load capacity, disassembly possible without breaking the engineered stone

Technical Instruction Sheet (42.48 kByte)

OUT NOW! LIQUI POLISH!

(191.46 kByte)

Liqui Polish: the liquid high-tech polish for machine application

Advantages:

high-tech suspension with inorganic polishing substances enables the use of one single product for several polishing steps, thus reducing the time expenditure for the polishing process
dust-free application (when applying and working with AKEMI Liqui Polish)
no health hazards arising from the inhalation of dust generated during grinding/polishing
clean working and storage
homogeneous mixture which produces a uniform and perfect lustre
exact dosage by means of the squeeze bottle and application nozzle
ready-to-use
very cost-effective on account of the small product quantities required
different composition for hard and soft stone available
multi-purpose application: polish of edges, small surfaces, tombstones; brightening up already laid flooring.
for all polishing machines: from the angle grinder to the industrial stone production line

Technical Instruction Sheet (30.48 kByte)

OUT NOW! SURFACE DISINFECTANT / OBJECT DESINFECTANT!

(212.24 kByte)

Surface Disinfectant: highly effective cleaning and disinfecting concentrate for floor and sanitary surfaces made of ceramics as well as natural and artificial stone.

disinfects floor surfaces in sanitary rooms, changing rooms and spa facilities
removes light dirt
suitable for ceramic surfaces
suitable for natural and cast stone
suitable for chrome, stainless steel and anodised aluminium

Broad spectrum of activity

bactericidal (incl. TBC)
levurocidal – effective against yeast (incl. C albicans)
to a limited extent virucidal (Vaccinia, BVDV, HBV, HCV, HIV)

registered in particular by: Bundesanstalt für Arbeitsschutz und Arbeitsmedizin (BAuA) („Federal agency for safety at work and industrial medicine“)
pleasant odour
on an aqueous basis

Technical Instruction Sheet (33.86 kByte)

Object Disinfectant: fast-acting and ready-to-use disinfectant for objects which come into direct contact with the body.

disinfects objects which come into direct contact with the body (e.g. door handles, toilet seats, taps) and small surfaces in spa and sauna areas
suitable for ceramic surfaces
suitable for natural and cast stone
suitable for chrome, stainless steel and anodised aluminium
suitable for sensitive surfaces made of acrylic glass and plexiglass e.g. solariums and covers

Broad spectrum of activity

bactericidal (incl. TBC)
levurocidal – effective against yeast (incl. C albicans)
to a limited extent virucidal (Vaccinia, BVDV, HBV, HCV, HIV)

registered in particular by: Bundesanstalt für Arbeitsschutz und Arbeitsmedizin (BAuA) („Federal agency for safety at work and industrial medicine“)
pleasant odour
free from alcohol
on an aqueous basis

Technical Instruction Sheet (32.68 kByte)

OUT NOW! COLOURING TINT LIQUID!

(242.7 kByte)

Colouring Tint liquid: easy and homogeneous miscible in liquid and low-viscosity AKEMI® adhesives

In addition to the tried and tested colouring pastes in the tube, AKEMI’s product range now alternatively contains Colouring tint liquid in 50 ml squeeze bottles.
To colour the AKEMI adhesives and fillers so they match the respective colour of the stone.
For the AKEPOX® adhesive (on an epoxy basis) and Marble Filler (on a polyester or acrylic basis) product lines there are colouring tint liquid which are only suitable for the respective product line.
colours: red, red-brown, white, black, ochre, green, brown, blue, beige and grey

Advantages:

high concentration of colour pigments which means they are economical in use
extremely UV and light-resistant pigments, i.e. no fading
exact dosage on account of the handy squeeze bottle
also available in the tones beige and grey

OUT NOW! URINE SCALE AND LIMESCALE REMOVER!

(200.29 kByte)

Urine Scale and Limescale Remover: cleaning concentrate for thorough cleaning

Used to remove stubborn limescale deposits, urine scale and soap scum (e.g. for floor drains, urinals, WCs).
compatible with chrome, stainless steel, acrylic
suitable for ceramic surfaces and hard stone which is resistant to acid

Technical Instruction Sheet (32.22 kByte)

OUT NOW! ALGAE AND MILDEW REMOVER LONGLIFE!

(143.07 kByte)

Algae and Mildew Remover LONGLIFE is a water-soluble cleaning concentrate, free of chlorine, acids, lyes and solvents.

The product durably removes films caused by plants on outdoor natural and artificial stones (s.a. marble, granite, sandstone, clinker, fine stoneware, concrete ashlar). It is excellently suited for terrace tiles, facades, staircases and walls. Excellently applicable on wood (screens, terraces) and roof tiles. The effect lasts for up to one year and thus durably prevents the regeneration of films caused by plants.

Technical Instruction Sheet (33.05 kByte)

OUT NOW! COLOUR INTENSIFIER W!

(95.14 kByte)

Colour Intensifier W is an impregnation on the basis of active ingredients emulsified in water which intensifies colour shades extremely well. Free of solvents, low odour.

Colour Intensifier W is a weather-resistant product with a long-term effect for indoors and outdoors. It produces a wet look without a glossy shine. It repels water and dirt and is particularly suitable for rough and absorbent natural and artificial stone.

Technical Instruction Sheet (38.09 kByte)

OUT NOW! QUARTZ CARE PRODUCTS!

(129.71 kByte)

The market share of Engineered Stone is increasing. Quartz-based stones and agglo marble are used regularly in kitchens and baths as well as for trendy flooring. AKEMI has therefore developed a product series for care and protection, which meets the special requirements of quartz-based surfaces: the Quartz Care - Line.

QUARTZ INTENSIVE CLEANER- cleans thoroughly
QUARTZ POLISH- refreshes the lustre of polished surfaces
QUARTZ CLEAN & CARE- cares and enhances the reistance to stains

Also available in sets!

Technical Instruction Sheet Quartz Intensive Cleaner  (32.95 kByte)

Technical Instruction Sheet Quartz Polish  (33.01 kByte)

Technical Instruction Sheet Quartz Clean & Care  (38.04 kByte)

OUT NOW! COLOUR CONVERTER!

COLOUR CONVERTER is a watery staining agent which creates a homogenous, weather- and UV-resistant yellow colouration on absorbent and acid-resistant natural stones.

COLOUR CONVERTER is a 1-component product which is easy to apply: Apply the product one or more times, depending on the absorbency of the stone, fully and evenly with a brush or a roller. In case only a slight colour intensification effect is desired, COLOUR CONVERTER can also be diluted with water.

Technical Instruction Sheet (43.63 kByte)

OUT NOW! COLOURING TINT LIQUID FOR POLYESTER-BASED ADHESIVES!

Used for colouring Marble Filler 1000, Marble Filler Super, MS 76, Polishing Line Adhesive-RAPID to match the colour of the filler with that of the respective stone. The liquid consistency makes it easier to mix the colouring tint with liquid products. Colouring tint liquid is available in 50 ml or 125 ml Squeeze-Bottles in 10 colours (red, red-brown, white, black, ochre, green, brown, blue, beige and grey) or assorted. The colour pigments contained have a very high UV-stability.

OUT NOW! COLOURING TINT LIQUID FOR EPOXY-BASED ADHESIVES (AKEPOX)!

Used for colouring AKEPOX fillers and adhesives to match the colour of the filler with that of the respective stone. The liquid consistency makes it easier to mix the colouring tint with liquid products. Colouring tint liquid is available in 50 ml or 125 ml Squeeze-Bottles in 10 colours (red, red-brown, white, black, ochre, green, brown, blue, beige, and grey) or assorted. The colour pigments contained have a very high UV-stability.

OUT NOW! COLOR SPECTRUM BONDING SYSTEM, MIXBOND!

The COLOR SPECTRUM BONDING SYSTEM is a complete system consiting of 15 different colored MIXBOND adhesives. Applied directly or mixed with each other any desired color shade can be exactlly matched. The system is especially used to color-match the adhesive for bonding Engineered Stone Caesar Stone (e.g. ^®, Silestone^®, Zodiaq^®, Corian^®) and natural stone in industry and handicraft.
Due to the constantly increasing color variety of Engineeres Stone and natural stone, this flexible color system contributes to the reduction of stock. 8 MIXBOND adhesives consist of basic colors (transparent, white, yellow, blue, brown, black, red, green).
To facilitate the application even more 7 MIXBOND adhesives have already been pre-mixed and color-matched to the best selling cast and natural stones. These premixed adhesives can be mixed further with each other and adjusted to the particular color shade even more.

Technical Instruction Sheet (28.84 kByte)

OUT NOW! CRYSTAL CLEAN!

(248.63 kByte)

CRYSTAL CLEAN is a fast drying cleaning product for the daily removal of light dirtying on all natural and cast stones as well as fine stoneware, clinker and ceramics. Due to an adjustment free of acids and lyes AKEMI^® Crystal Clean does not attack surfaces and joints and is especially suited for marble and limestone. AKEMI^® Crystal Clean cleans free of streaks and does not build up layers even if applied freuqently. AKEMI^® Crystal Clean is available as a concentrate or in a ready-to-use pump spray bottle.

Technical Instruction Sheet (26.05 kByte)

		The company \| Products \| References \| Info \| Download \| Contact \| Sitemap \| Imprint \| Home News Press Fairs Terms and Conditions News from AKEMI^® PRODUCTS OUT NOW! MS 76 Rodding Bond (213.93 kByte) MS 76 Rodding Bond - in the cartridge - for groove reinforcement wih metal, glass fibre and carbon fibre MS 76 Rodding Bond (System 10:1) is a simple, reliable and economic method of bonding reinforcements in kitchen worktops made of metal (such as iron, steel and aluminium) and a wide variety of plastics (such as glass fibre and carbon fibre plastics). MS 76 Rodding Bond is suitable for unloaded groove bonding up to a temperature of 100° C. The short hardening time (20 – 40 minutes) enables fast further processing. Advantages: very good adhesion on metal, GRP, CRP rapid hardening (work can continue after 20 - 40 minutes) suitable for groove bonding indoors up to 100° C simple dosing and mixing on account of the cartridge system and therefore reliable application high cost effectiveness due to time-saving application and no waste of adhesive Technical Instruction Sheet (45.17 kByte) OUT NOW! Epoxy Remover Epoxy Remover: "Free of acids - Lyes and CHC" Removes residues of resins and adhesives from all natural stones, ceramic tiles and other mineral surfaces. Due to its very good dissolving and expansion properties Epoxy Remover removes: Residues of epoxy resins Residues of joint mortar based on epoxy resins Sealings based on synthetic resins Other resins and adhesive residues The cleaner can be used on all contaminated surfaces made of natural and artificial stone like granite, gneiss, quartzite, limestone, concrete ashlar, clinker and ceramics. Technical Instruction Sheet (32.34 kByte) OUT NOW! Darkener Plus (152.89 kByte) Farbonvertiefer Plus: Ready-to-use special impregnation, which can be dyed using AKEMI Stone Ink. Darkens the colour and structure of fine ground and polished stones. AKEMI Darkener Plus transports the AKEMI Stone Ink dye stuff into the stone's pore system and has a long-lasting effect. Suitable for all fine ground and polished, absorbent natural and artificial stones, such as marble, slate, Solnhofen slabs, sandstone, granite, gneiss and concrete blocks. Properties: lasting, darkening effect intensifies and changes colour in combination with AKEMI Stone Ink effective coulour stability Technical Instruction Sheet (39.17 kByte) OUT NOW! COLOUR BOND! (419.62 kByte) COLOUR BOND: pre-coloured two-component adhesive in 250 ml cartridges for the fast, simple and reliable attainment of invisible joints for Engineered Stone (such as Caesarstone, Silestone, Zodiaq) as well as natural stone. Advantages: ready-to-use cartridges with colour-matched adhesives application reliability: exact dosage and mixing economy: no preparation time (no manual dosage and mixing); fast application (direct into the joint); no excess adhesive during the work process; no time needed for cleaning afterwards enables the attainment of extremely thin, seamless adhesive joints adhesive on the basis of polyester resin, thus no pungent odours as with acrylic bonding systems clear product range (reduction to the main colours for engineered stone and natural stone) saves retailers and users costs high adhesive strength despite extremely high load capacity, disassembly possible without breaking the engineered stone Technical Instruction Sheet (42.48 kByte) OUT NOW! LIQUI POLISH! (191.46 kByte) Liqui Polish: the liquid high-tech polish for machine application Advantages: high-tech suspension with inorganic polishing substances enables the use of one single product for several polishing steps, thus reducing the time expenditure for the polishing process dust-free application (when applying and working with AKEMI Liqui Polish) no health hazards arising from the inhalation of dust generated during grinding/polishing clean working and storage homogeneous mixture which produces a uniform and perfect lustre exact dosage by means of the squeeze bottle and application nozzle ready-to-use very cost-effective on account of the small product quantities required different composition for hard and soft stone available multi-purpose application: polish of edges, small surfaces, tombstones; brightening up already laid flooring. for all polishing machines: from the angle grinder to the industrial stone production line Technical Instruction Sheet (30.48 kByte) OUT NOW! SURFACE DISINFECTANT / OBJECT DESINFECTANT! (212.24 kByte) Surface Disinfectant: highly effective cleaning and disinfecting concentrate for floor and sanitary surfaces made of ceramics as well as natural and artificial stone. disinfects floor surfaces in sanitary rooms, changing rooms and spa facilities removes light dirt suitable for ceramic surfaces suitable for natural and cast stone suitable for chrome, stainless steel and anodised aluminium Broad spectrum of activity bactericidal (incl. TBC) levurocidal – effective against yeast (incl. C albicans) to a limited extent virucidal (Vaccinia, BVDV, HBV, HCV, HIV) registered in particular by: Bundesanstalt für Arbeitsschutz und Arbeitsmedizin (BAuA) („Federal agency for safety at work and industrial medicine“) pleasant odour on an aqueous basis Technical Instruction Sheet (33.86 kByte) Object Disinfectant: fast-acting and ready-to-use disinfectant for objects which come into direct contact with the body. disinfects objects which come into direct contact with the body (e.g. door handles, toilet seats, taps) and small surfaces in spa and sauna areas suitable for ceramic surfaces suitable for natural and cast stone suitable for chrome, stainless steel and anodised aluminium suitable for sensitive surfaces made of acrylic glass and plexiglass e.g. solariums and covers Broad spectrum of activity bactericidal (incl. TBC) levurocidal – effective against yeast (incl. C albicans) to a limited extent virucidal (Vaccinia, BVDV, HBV, HCV, HIV) registered in particular by: Bundesanstalt für Arbeitsschutz und Arbeitsmedizin (BAuA) („Federal agency for safety at work and industrial medicine“) pleasant odour free from alcohol on an aqueous basis Technical Instruction Sheet (32.68 kByte) OUT NOW! COLOURING TINT LIQUID! (242.7 kByte) Colouring Tint liquid: easy and homogeneous miscible in liquid and low-viscosity AKEMI® adhesives In addition to the tried and tested colouring pastes in the tube, AKEMI’s product range now alternatively contains Colouring tint liquid in 50 ml squeeze bottles. To colour the AKEMI adhesives and fillers so they match the respective colour of the stone. For the AKEPOX® adhesive (on an epoxy basis) and Marble Filler (on a polyester or acrylic basis) product lines there are colouring tint liquid which are only suitable for the respective product line. colours: red, red-brown, white, black, ochre, green, brown, blue, beige and grey Advantages: high concentration of colour pigments which means they are economical in use extremely UV and light-resistant pigments, i.e. no fading exact dosage on account of the handy squeeze bottle also available in the tones beige and grey OUT NOW! URINE SCALE AND LIMESCALE REMOVER! (200.29 kByte) Urine Scale and Limescale Remover: cleaning concentrate for thorough cleaning Used to remove stubborn limescale deposits, urine scale and soap scum (e.g. for floor drains, urinals, WCs). compatible with chrome, stainless steel, acrylic suitable for ceramic surfaces and hard stone which is resistant to acid Technical Instruction Sheet (32.22 kByte) OUT NOW! ALGAE AND MILDEW REMOVER LONGLIFE! (143.07 kByte) Algae and Mildew Remover LONGLIFE is a water-soluble cleaning concentrate, free of chlorine, acids, lyes and solvents. The product durably removes films caused by plants on outdoor natural and artificial stones (s.a. marble, granite, sandstone, clinker, fine stoneware, concrete ashlar). It is excellently suited for terrace tiles, facades, staircases and walls. Excellently applicable on wood (screens, terraces) and roof tiles. The effect lasts for up to one year and thus durably prevents the regeneration of films caused by plants. Technical Instruction Sheet (33.05 kByte) OUT NOW! COLOUR INTENSIFIER W! (95.14 kByte) Colour Intensifier W is an impregnation on the basis of active ingredients emulsified in water which intensifies colour shades extremely well. Free of solvents, low odour. Colour Intensifier W is a weather-resistant product with a long-term effect for indoors and outdoors. It produces a wet look without a glossy shine. It repels water and dirt and is particularly suitable for rough and absorbent natural and artificial stone. Technical Instruction Sheet (38.09 kByte) OUT NOW! QUARTZ CARE PRODUCTS! (129.71 kByte) The market share of Engineered Stone is increasing. Quartz-based stones and agglo marble are used regularly in kitchens and baths as well as for trendy flooring. AKEMI has therefore developed a product series for care and protection, which meets the special requirements of quartz-based surfaces: the Quartz Care - Line. QUARTZ INTENSIVE CLEANER- cleans thoroughly QUARTZ POLISH- refreshes the lustre of polished surfaces QUARTZ CLEAN & CARE- cares and enhances the reistance to stains Also available in sets! Technical Instruction Sheet Quartz Intensive Cleaner (32.95 kByte) Technical Instruction Sheet Quartz Polish (33.01 kByte) Technical Instruction Sheet Quartz Clean & Care (38.04 kByte) OUT NOW! COLOUR CONVERTER! COLOUR CONVERTER is a watery staining agent which creates a homogenous, weather- and UV-resistant yellow colouration on absorbent and acid-resistant natural stones. COLOUR CONVERTER is a 1-component product which is easy to apply: Apply the product one or more times, depending on the absorbency of the stone, fully and evenly with a brush or a roller. In case only a slight colour intensification effect is desired, COLOUR CONVERTER can also be diluted with water. Technical Instruction Sheet (43.63 kByte) OUT NOW! COLOURING TINT LIQUID FOR POLYESTER-BASED ADHESIVES! Used for colouring Marble Filler 1000, Marble Filler Super, MS 76, Polishing Line Adhesive-RAPID to match the colour of the filler with that of the respective stone. The liquid consistency makes it easier to mix the colouring tint with liquid products. Colouring tint liquid is available in 50 ml or 125 ml Squeeze-Bottles in 10 colours (red, red-brown, white, black, ochre, green, brown, blue, beige and grey) or assorted. The colour pigments contained have a very high UV-stability. OUT NOW! COLOURING TINT LIQUID FOR EPOXY-BASED ADHESIVES (AKEPOX)! Used for colouring AKEPOX fillers and adhesives to match the colour of the filler with that of the respective stone. The liquid consistency makes it easier to mix the colouring tint with liquid products. Colouring tint liquid is available in 50 ml or 125 ml Squeeze-Bottles in 10 colours (red, red-brown, white, black, ochre, green, brown, blue, beige, and grey) or assorted. The colour pigments contained have a very high UV-stability. OUT NOW! COLOR SPECTRUM BONDING SYSTEM, MIXBOND! The COLOR SPECTRUM BONDING SYSTEM is a complete system consiting of 15 different colored MIXBOND adhesives. Applied directly or mixed with each other any desired color shade can be exactlly matched. The system is especially used to color-match the adhesive for bonding Engineered Stone Caesar Stone (e.g. ^®, Silestone^®, Zodiaq^®, Corian^®) and natural stone in industry and handicraft. Due to the constantly increasing color variety of Engineeres Stone and natural stone, this flexible color system contributes to the reduction of stock. 8 MIXBOND adhesives consist of basic colors (transparent, white, yellow, blue, brown, black, red, green). To facilitate the application even more 7 MIXBOND adhesives have already been pre-mixed and color-matched to the best selling cast and natural stones. These premixed adhesives can be mixed further with each other and adjusted to the particular color shade even more. Technical Instruction Sheet (28.84 kByte) OUT NOW! CRYSTAL CLEAN! (248.63 kByte) CRYSTAL CLEAN is a fast drying cleaning product for the daily removal of light dirtying on all natural and cast stones as well as fine stoneware, clinker and ceramics. Due to an adjustment free of acids and lyes AKEMI^® Crystal Clean does not attack surfaces and joints and is especially suited for marble and limestone. AKEMI^® Crystal Clean cleans free of streaks and does not build up layers even if applied freuqently. AKEMI^® Crystal Clean is available as a concentrate or in a ready-to-use pump spray bottle. Technical Instruction Sheet (26.05 kByte)

News from AKEMI®

News from AKEMI^®